Table of Contents
Having a stove burner that won’t heat can be a frustrating problem in the kitchen. Not only can it hinder your cooking, but it can also be a safety hazard.
In this article, we will cover some of the common causes and solutions to help you fix a stove burner that won’t heat.
Cause 1: Dirty Burner
A dirty burner can cause a stove burner not to heat. Food particles, grease, and other debris can clog the burner, preventing the flame from reaching its maximum potential. To fix this problem, simply remove the burner and clean it with warm soapy water.
Solution: Clean the Burner
To clean a burner, remove it from the stove and soak it in warm soapy water for a few minutes. Use a brush or toothbrush to remove any food particles, grease, or other debris that may have accumulated on the burner. Rinse it thoroughly and let it air dry before reassembling and placing it back on the stove.
Cause 2: Broken Igniter
An electric stove has an igniter that is responsible for creating the spark that lights the burner. If the igniter is broken, the stove burner will not heat. To determine if the igniter is the problem, try lighting the stove burner manually with a lighter. If the flame stays on after you light it, the igniter is likely the issue.
Solution: Replace the Igniter
To replace an igniter, you will need to turn off the power to the stove and remove the burner to access the igniter. Replace the igniter with a new one that is compatible with your stove model and reassemble the stove.
Cause 3: Clogged Gas Orifice
A clogged gas orifice can cause a stove burner not to heat. Over time, food particles and grease can accumulate in the orifice, preventing gas from flowing properly.
Solution: Clean the Gas Orifice
To clean a clogged gas orifice, you will need to remove the burner and access the orifice. Clean the orifice with a soft-bristled brush or a needle to remove any debris. Reassemble the stove and test the burner to see if it is heating properly.
Cause 4: Defective Valve
A defective valve can cause a stove burner not to heat. If the valve is not allowing gas to flow properly, the burner will not heat.
Solution: Replace the Valve
To replace a defective valve, you will need to turn off the power to the stove and remove the burner to access the valve. Replace the valve with a new one that is compatible with your stove model and reassemble the stove.
In conclusion, a stove burner that won’t heat can be caused by several factors, including a dirty burner, broken igniter, clogged gas orifice, or defective valve. By following the solutions outlined in this article, you can quickly and easily fix a stove burner that won’t heat and get back to cooking in no time.
“If you need help to rescue your home or business appliances, don’t hesitate to contact SOS Appliance Repairs in Brantford, London, Woodstock, Hamilton, Ingersoll and all Southern Ontario area”.
