Stove Wont Heat: Understanding the Causes and Solutions

stove won’t heat - sos appliance repairs

Table of Contents

A stove is an essential appliance in the kitchen, allowing you to cook your meals to perfection. But what do you do when your stove won’t heat?

A stove that won’t heat is frustrating and can affect your cooking routine. In this article, we’ll discuss the most common reasons for a stove not heating and how to fix the problem.

Common Causes

  1. Burners are clogged or dirty

One of the most common reasons for a stove not heating is clogged or dirty burners. Food and grease can get trapped in the burner, blocking the flow of gas and preventing the stove from heating up. To fix this issue, you need to clean the burners thoroughly.

  1. Burner cap is not positioned correctly

The burner cap is the round metal piece that covers the burner. If it’s not positioned correctly, it can block the flame and prevent the stove from heating. To fix this, simply reposition the cap to ensure it’s aligned with the burner.

  1. Broken igniter

The igniter is responsible for lighting the stove’s burners. If it’s broken, the stove won’t heat. You’ll need to replace the igniter to fix the problem.

  1. Blocked gas line

A blocked gas line can prevent the stove from heating up. Check for any debris or blockages in the gas line, and if you find any, remove them to restore the flow of gas.


  1. Clean the burners

To clean the burners, remove them and soak them in a mixture of warm water and dish soap. Then, use a scrub brush to remove any food or grease buildup. Reinstall the burners and check if the stove is heating up.

  1. Reposition the burner cap

To reposition the burner cap, simply lift it up and place it back in the correct position. Make sure it’s aligned with the burner and the flame is not blocked.

  1. Replace the igniter

To replace the igniter, turn off the stove’s gas supply and unplug the stove. Locate the igniter and remove it by unscrewing it from the burner. Replace it with a new one and turn on the gas supply to test if the stove is heating up.

  1. Clear the gas line

To clear the gas line, turn off the stove’s gas supply and unplug the stove. Locate the gas line and remove any debris or blockages. Turn on the gas supply and test if the stove is heating up.


If your stove won’t heat, it can be due to several reasons, including clogged or dirty burners, a burner cap not positioned correctly, a broken igniter, or a blocked gas line. By following the solutions outlined in this article, you can fix the problem and get your stove back to working properly.

If the problem persists, it’s best to call a professional appliance repair service to diagnose and fix the issue.

“If you need help to rescue your home or business appliances, don’t hesitate to contact SOS Appliance Repairs in BrantfordLondonWoodstockHamiltonIngersoll and all Southern Ontario area”.

Leave a Reply

Your email address will not be published. Required fields are marked *